Express Names™ Screen Printed Transfers

Express Names™ are individual screen printed transfer names.

• Available in 3 formats: Straight, Arch, Vertical
• 13 fonts to choose from: Arial, Impress, Vogue, Rex, Hercules, Full Block, Avalon, Averta Bold, Handel Gothic, Homeward Bound, Zag Bold, Athletic Script, Brush Script
• Letter height: 1" with a Max Width of 4", 4.5", or 5" (Available in Straight format only)
• Letter heights: 2", 2.5", and 3" with a Max Width of 9", 11", or 14"
• Recommended Fabrics: cotton, polyester, cotton/poly blends

Order as few as 1 Express Name™!

^{Pricing is in USD per name}

Rush fee: $25 per 25 names

Order before 3 pm ET and Express Names™, stock numbers, and Flag packs will ship same day!

Names must be in UPPERCASE except for the Script fonts

Full Block does not include the following characters: - @ $ %^ *( ) = + / < > { } [ } |

To make a large vertical transfer, split words into multiple lines. For Example with the word COMPTON: Enter COMP on one line and TON on the next.

.TXT

Upload a list of names for easy ordering. Save your .TXT file in a single column of names.

Pre-Production:
Please check transfers carefully before heat-applying.

Set Temperature:
Set the press to 365°F

Pre-Heat Garment:
First, place the garment on platen, heat press for 3-5 seconds or until there is no more steam to remove wrinkles and moisture. Ensure there are no obstructions such as buttons, pockets, or seams. If there are, raise only the print area with a Print Perfect Pad.

Position & Press:
Place the transfer on the garment so that the ink side is facing down. Close the heat press and apply for 4-6 seconds.

Peel Warm:
Open the press. Wait 5 seconds and peel the carrier in a smooth, even motion.

Time: 4-6 Seconds

Temperature: 365°F

Pressure: Medium/Firm 6-8 (60-80 psi)

Peel: Warm

Note: The recommended time, temperature, and pressure settings are for Stahls' Hotronix® heat press machines. Settings on other heat presses may vary.

Can also be applied at 340°F, for 10 seconds, peeling warm

If applying with Champ Pro numbers, you can apply Express Names at same time at 290°F, for 15 seconds

Names and Numbers are on release paper sized for easy application-just touch the paper and your digits and names will all be properly spaced

Why is it necessary to pre-heat a garment before heat applying?

Pre-heating your garment removes the chemicals and moisture that may be in the garment due to manufacturing. Also, pre-heating assures a wrinkle free surface for heat application.

Can I add a number to the same side of a shirt already printed with a transfer?

Yes, just position the number and cover the existing print with a cover sheet, heat apply according to the application instructions.

If I just printed the front, can I print the back?

Our heat presses have a non-stick coating, so printing on the back is as simple as flipping the shirt over and applying the back. The front print will not be affected.

Can screen printed names and number be applied at the same time?

Yes, the names and numbers are designed to be applied at the same time. The release paper is printed with a grid and sized for easy alignment.

Are there any special considerations when transferring names and numbers onto 100% polyester or sublimation dyed garments?

All of our products will adhere to 100% polyester. If the fabric was dyed you may get some bleed through since the heat will cause the garment color to sublimate further. You will want to use a transfer type that applies at a lower temperature, such as our Elasti Prints numbers.

What is the maximum number of letters in a name that can be done?

It depends on the letters. For example if they are all I's, you can fit more than W's. If 11" wide, at about 12 characters you will start to get condensed letters, but you can keep going depending on how squished you want. At about 20, it won't be readable, but again, depending on what letters.